Writing your own avocado VT test

In this article, we’ll talk about:

  1. Where the test files are located
  2. Write a simple test file
  3. Try out your new test, send it to the mailing list

Write our own ‘uptime’ test - Step by Step procedure

Now, let’s go and write our uptime test, which only purpose in life is to pick up a living guest, connect to it via ssh, and return its uptime.

  1. First we need to locate our provider directory. It’s inside Avocado data directory (avocado config –datadir), usually in ~/avocado/data/avocado-vt. We are going to write a generic tp-qemu test, so let’s move into the right git location:

    $ cd $AVOCADO_DATA/avocado-vt/test-providers.d/downloads/io-github-autotest-qemu
    
  2. Our uptime test won’t need any qemu specific feature. Thinking about it, we only need a vm object and establish an ssh session to it, so we can run the command. So we can store our brand new test under generic/tests:

    $ touch generic/tests/uptime.py
    $ git add generic/tests/uptime.py
    
  3. OK, so that’s a start. So, we have at least to implement a function run. Let’s start with it and just put the keyword pass, which is a no op. Our test will be like:

def run(test, params, env):
    """
    Docstring describing uptime.
    """
    pass
  1. Now, what is the API we need to grab a VM from our test environment? Our env object has a method, get_vm, that will pick up a given vm name stored in our environment. Some of them have aliases. main_vm contains the name of the main vm present in the environment, which is, most of the time, vm1. env.get_vm returns a vm object, which we’ll store on the variable vm. It’ll be like this:
def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
  1. A vm object has lots of interesting methods, which we plan on documenting them more thoroughly, but for now, we want to ensure that this VM is alive and functional, at least from a qemu process standpoint. So, we’ll call the method verify_alive(), which will verify whether the qemu process is functional and if the monitors, if any exist, are functional. If any of these conditions are not satisfied due to any problem, an exception will be thrown and the test will fail. This requirement is because sometimes due to a bug the vm process might be dead on the water, or the monitors are not responding:
def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
  1. Next step, we want to log into the vm. The vm method that does return a remote session object is called wait_for_login(), and as one of the parameters, it allows you to adjust the timeout, that is, the time we want to wait to see if we can grab an ssh prompt. We have top level variable login_timeout, and it is a good practice to retrieve it and pass its value to wait_for_login(), so if for some reason we’re running on a slower host, the increase in one variable will affect all tests. Note that it is completely OK to just override this value, or pass nothing to wait_for_login(), since this method does have a default timeout value. Back to business, picking up login timeout from our dict of parameters:
def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    timeout = float(params.get("login_timeout", 240))
  1. Now we’ll call wait_for_login() and pass the timeout to it, storing the resulting session object on a variable named session:
def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    timeout = float(params.get("login_timeout", 240))
    session = vm.wait_for_login(timeout=timeout)
  1. Avocado-VT will do its best to grab this session, if it can’t due to a timeout or other reason it’ll throw a failure, failing the test. Assuming that things went well, now you have a session object, that allows you to type in commands on your guest and retrieve the outputs. So most of the time, we can get the output of these commands through the method cmd(). It will type in the command, grab the stdin and stdout, return them so you can store it in a variable, and if the exit code of the command is != 0, it’ll throw a aexpect.ShellError?. So getting the output of the unix command uptime is as simple as calling cmd() with ‘uptime’ as a parameter and storing the result in a variable called uptime:
def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    timeout = float(params.get("login_timeout", 240))
    session = vm.wait_for_login(timeout=timeout)
    uptime = session.cmd('uptime')
  1. If you want to just print this value so it can be seen on the test logs, just log the value of uptime using the logging library. Since that is all we want to do, we may close the remote connection, to avoid ssh/rss sessions lying around your test machine, with the method close(). Now, note that all failures that might happen here are implicitly handled by the methods called. If a test went from its beginning to its end without unhandled exceptions, autotest assumes the test automatically as PASSed, no need to mark a test as explicitly passed. If you have explicit points of failure, for more complex tests, you might want to add some exception raising:
def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    timeout = float(params.get("login_timeout", 240))
    session = vm.wait_for_login(timeout=timeout)
    uptime = session.cmd('uptime')
    logging.info("Guest uptime result is: %s", uptime)
    session.close()
  1. Now, I deliberately introduced a bug on this code just to show you guys how to use some tools to find and remove trivial bugs on your code. I strongly encourage you guys to check your code with the inspektor tool. This tool uses pylint to catch bugs on test code. You can install inspektor by adding the COPR repo https://copr.fedoraproject.org/coprs/lmr/Autotest/ and doing

    $ yum install inspektor
    

    After you’re done, you can run it:

    $ inspekt lint generic/tests/uptime.py
    ************* Module generic.tests.uptime
    E0602: 10,4: run: Undefined variable 'logging'
    Pylint check fail: generic/tests/uptime.py
    Syntax check FAIL
    
  2. Ouch. So there’s this undefined variable called logging on line 10 of the code. It’s because I forgot to import the logging library, which is a python library to handle info, debug, warning messages. Let’s Fix it and the code becomes:

import logging

def run(test, params, env):
    """
    Docstring describing uptime.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    timeout = float(params.get("login_timeout", 240))
    session = vm.wait_for_login(timeout=timeout)
    uptime = session.cmd("uptime")
    logging.info("Guest uptime result is: %s", uptime)
    session.close()
  1. Let’s re-run inspektor to see if it’s happy with the code generated:

    $ inspekt lint generic/tests/uptime.py
    Syntax check PASS
    
  2. So we’re good. Nice! Now, as good indentation does matter to python, inspekt indent will fix indentation problems, and cut trailing whitespaces on your code. Very nice for tidying up your test before submission:

    $ inspekt indent generic/tests/uptime.py
    
  3. Now, you can test your code. When listing the qemu tests your new test should appear in the list (or shouldn’t it?):

    $ avocado list uptime
    
  4. There is one more thing to do. Avocado-vt does not walk the directories, it uses Cartesian config to define test and all possible variants of tests. To add our test to Cartesian config we need yet another file:

    $ touch generic/tests/cfg/uptime.cfg
    $ git add generic/tests/cfg/uptime.cfg
    
  5. The file might look like this:

    - uptime:
        virt_test_type = qemu libvirt
        type = uptime
    

    where the virt_test_type specifies what backends can run this test and type specifies the test file. The .py will be appended and it’ll be searched for in the usual location.

  6. For the second time, let’s try to discover the test:

    $ avocado list uptime
    
  7. OK still not there. We need to propagate the change to the actual config by running vt-bootstrap:

    $ avocado vt-bootstrap
    
  8. And now you’ll finally see the test:

    $ avocado list uptime
    
  9. Now, you can run your test to see if everything went well:

    $ avocado run --vt-type qemu uptime
    
  10. OK, so now, we have something that can be git committed and sent to the mailing list (partial):

diff --git a/generic/tests/uptime.py b/generic/tests/uptime.py
index e69de29..65d46fa 100644
--- a/tests/uptime.py
+++ b/tests/uptime.py
@@ -0,0 +1,13 @@
+import logging
+
+def run(test, params, env):
+    """
+    Docstring describing uptime.
+    """
+    vm = env.get_vm(params["main_vm"])
+    vm.verify_alive()
+    timeout = float(params.get("login_timeout", 240))
+    session = vm.wait_for_login(timeout=timeout)
+    uptime = session.cmd("uptime")
+    logging.info("Guest uptime result is: %s", uptime)
+    session.close()
  1. Oh, we forgot to add a decent docstring description. So doing it:
import logging

def run(test, params, env):

    """
    Uptime test for virt guests:

    1) Boot up a VM.
    2) Establish a remote connection to it.
    3) Run the 'uptime' command and log its results.

    :param test: QEMU test object.
    :param params: Dictionary with the test parameters.
    :param env: Dictionary with test environment.
    """

    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    timeout = float(params.get("login_timeout", 240))
    session = vm.wait_for_login(timeout=timeout)
    uptime = session.cmd("uptime")
    logging.info("Guest uptime result is: %s", uptime)
    session.close()
  1. git commit signing it, put a proper description, then send it with git send-email. Profit!